NANO
JOINERY
Made to Fit
Your Home
Local Service
You Can Rely On
Quality
That Lasts
What we make
01 / Process
Smoother · Clearer
More cost · effective
One point of contact, start to finish
Projects
02 / SELECTED WORK
Hawthorn Residence
Hawthorn – Kitchen & Living
The Quarry House
Kew – Full-Home
Albert Park Terrace
Albert Park – Heritage Kitchen
Crafted from design to installation
03 / ABOUT
A Melbourne-based custom joinery and whole-home cabinetry brand, offering one complete solution for modern Australian homes.
We design custom cabinetry for kitchens, bathrooms, wardrobes, laundries, living areas and full-home storage. From the initial concept and material selection to production, logistics, delivery and installation, Nano Joinery manages every step, with a clear focus on quality, practicality and detail.
Good joinery is not only about appearance. It must be functional, durable, well-planned and suited to the way each family lives. That is why we work closely with homeowners, builders, designers and renovators to balance design, budget and everyday usability.
Our Vision
Set the benchmark for what joinery can be.
Our Mission
Deliver design intent, intact.
One seamless service.
Design, manufacturing, logistics and installation.
Same Standard, Better Value
04 / The Difference
Drawn in Melbourne, made in our own overseas facility, delivered and installed by our own team.
The same substrates, hardware and shop drawings a local workshop would quote, without the layers of margin in between.
Better Priced, Same Spec
We produce in our own facility offshore and manage the freight ourselves, so a Nano package comes in under a like-for-like Melbourne quote, same board, same hardware, same detailing. The saving comes out of the supply chain, not out of the joinery.
Built To Australian Standard
Substrates, edging, adhesives and hardware are specified to Australian requirements, moisture-resistant board to wet areas, low-emission panels, soft-close hardware. Every unit is inspected and dry-assembled before dispatch, then checked again on arrival in Melbourne.
A Dated Programme, Held
Design sign-off, production slot, sailing date and install week are all dated at quote stage and tracked by one contact. Typically eight weeks start to finish. If a date moves, you hear it from us before it affects your trades.
Rework Without A Second Wait
Every order is produced with surplus panels from the same batch and finish, held here in Melbourne. If a piece is damaged or has to be remade, we rectify it from that stock, no re-order, no second shipment, no reset on your install date. Goods are edge-protected, foam-wrapped and crated so it rarely comes to that.
What you actually compare
05 / Like For Like
| Line Item | Typical Quote | Nano Joinery |
|---|---|---|
| Shop drawings signed off before anything is cut | Yes | Yes |
| Board, edging and hardware to Australian standards | Yes | Yes |
| Measure, delivery and installation by the maker | Varies | Yes |
| Spare panels from your batch held for rectification | Varies | Every Order |
| Indicative cost, like for like | Baseline | Lower |
Every project is quoted on its own drawings, finishes and site conditions.
One team accountable.
Built to Australian standards.
What we make
06 / CAPABILITY
Kitchen
Considered kitchens where every reveal, drawer and door lands exactly as drawn.
Bathroom & Laundries
Vanities, laundries and wet-area cabinetry. Durable, well-planned and built for daily life.
Wardrobes
Walk-ins, robes and dressing rooms built to fit the room and the life in it.
Full Home
A single hand across the whole house. Kitchen, living, storage, everything between.
To The Drawing
07 / Proof
What we detail on the sheet is what lands on site. Compare shop drawing and installed photograph.
What we make
08 / On Site
Filmed on handover day. Cove lighting on, joinery fitted, floors cleaned. This is the standard every Nano Joinery project is walked off against.
Point of contact
01
Whole-home coverage
100%
Who We Work With
09 / Client
Homeowners & renovators
One point of contact from concept to install. A clearer, smoother and more cost-effective way to get custom joinery done.
Builders
We read your drawings the way you intended them and hold the line on programme. What we promise to site, we deliver to site.
Architects
We build for the architect’s intent and the builder’s programme. Your reputation is on our work, and we treat it that way.
Interior designers
From materiality to hardware to the last reveal, we help realise the look you’ve specified — intact.
A trade partner
Not a supplier.
Before you brief us
10 / FAQ
Do you work directly with homeowners?
Yes. We work with homeowners and renovators directly, as well as builders, architects and interior designers. Either way, you get one point of contact from design to installation.
What can you make?
Custom cabinetry for kitchens, bathrooms, wardrobes, laundries, living areas and full-home storage. From a single vanity to a whole-home joinery package.
Is there a minimum project size?
No. A bathroom vanity, a wardrobe system or a full-home package: the same process and the same standard applies.
Do you install your own work?
Yes. Delivery and installation are managed by Nano Joinery, so handover is clean and accountability sits in one place.
How do you keep projects cost-effective?
We work with trusted manufacturing partners and manage logistics ourselves. Flexible design options and reliable production quality, without the usual layers of markup.
What is your typical lead time?
It depends on scope. You get a clear programme with your quote, and a flag raised early if anything moves.
Have a project in the pipeline?
Let's talk about your project.
Have drawings, a timeline or a question? Send an enquiry and we’ll be in touch.